360 Self Leveling Laser Level for Indoor & Outdoor
Get Accurate Measures Anywhere!
Whether you are measuring angles from indoors or outdoor, this self-leveling laser level will not let you down. With its 3D green lines, you can precisely measure anything regardless of the environment. This just makes your DIY life more effortless than ever!
- With three 360° laser planes - one horizontal line and two vertical lines for better maximum accuracy.
- Has a rechargeable battery that can run continuously for more than 20 hours.
- Equipped with intelligent chip remote control and touchscreen design.
- Powerful green laser lines for better visibility. Brightness increases as the distance became longer.
3 x 360° Laser Lines
This laser level has one horizontal line and two vertical lines that rotate at 360 degrees leaving no dead angle in the room. This self-leveling laser comes with an intelligent remote control where you can select your preferred type of lines and adjust their brightness.
Better Visibility
This self-leveling laser level has green laser lines which are 4 times brighter than the red beam. Using a PRACMAU new laser transmitter makes the lines more visible even outdoors. When using this 360 laser level, the longer the distance, the brighter the line becomes.
Multiple Ways of Use
This laser line level is equipped with 1/4" thread allowing you to mount in standard tripods or laser mounting poles. It also has a strong magnetic base where you can rotate the laser level at any angle. The laser level tool is suitable for plastering, dotting, tiling, and many more.
Self-Leveling & Manual Mode
When using the self-leveling mode, you can tilt the device within ± 4°. If it exceeds the range, the alarm will turn on. This prevents you from making further mistakes. However, with the manual mode, you can use the self-leveling laser without an alarm and measure any angle.
Specifications:
- Accuracy: ± 0.2mm/m (± 1/13 in at 33 ft)
- Working distance: 30 m* (depending on the degree of illumination)
- Compensator range: ± 4°
- Compensator installation time: < 4 seconds
- Laser beam color: green
- Laser class and wavelength: II, 635 nm, <1mw
- Tripod thread: 1/4 “
- Power source: Lithium battery 5000 mAh 3.7V
- Working time: 3-9 hours (depending on the number turned on of planes)
- Working temperature: from -10°С to + 40°С
- Storage temperature: from -20°С to + 70°С
- Set weight: 1.62 kg
- Weight of the device: 680 g
- Dimensions of the device: L.W.H. ~ 12cm / 6cm / 11cm (without protruding towers)
- Minimum distance from the horizon:
- to the floor – 11.3 cm
- to the ceiling – 1.6 cm
- Minimum distance from vertical to wall: 9mm
Package Includes:
Basic Package
- 1 x Laser Level
- 1 x US Plug Charger
- 1 x Rotary Table
- 1 x Oxford Bag
- 1 x Laser Level
- 1 x US Plug Charger
- 1 x Rotary Table
- 1 x Oxford Bag
- 1 x Oxford Bag
- 1 x Wall Bracket
- 1 x Tripod